Save big with exclusive tape deals

Mastering the Bond: Techniques for Low-Surface-Energy Plastics

9/26/20261 min read

PP and PE plastics are notoriously difficult to bond with standard PSA tapes. Bonding failure often occurs weeks after assembly.

  1. Select LSE‑formulated adhesive tapes instead of general‑purpose grades.

  2. Remove mold‑release agent and grease; corona or flame treatment improves surface dyne level.

  3. Apply adequate roller pressure; allow dwell time for full bond build‑up.

  4. For continuously submerged or safety‑critical connections, add mechanical fasteners.

Always run aging tests under real‑world temperature‑humidity conditions instead of only room‑temperature hand‑peel trials.